Power Steering Rack And Pinion compatible for Subaru Legacy Impreza Outback 2005-09

Application

For Impreza 2008 (submodel: 2.5i, Outback Sport, Sport, WRX)
For Impreza 2009 (submodel: 2.5 GT, 2.5i, Outback Sport, Sport, WRX, WRX Premium)
For Legacy 2006-2009 2.5i
For Legacy GT 2005-2006, 2008
For Legacy GT Limited 2005,2007-2009
For Legacy GT spec.B 2006
For Legacy i 2005
For Legacy Limited 2005,2008
ForLegacy Touring 2008
For Legacy 2007-2009 (submodel: 2.5i Limited, 2.5i Special Edition)
For Legacy 2009 (submodel: 2.5i Touring, 3.0 R, 3.0 R Premier)
For Outback 2007 2.5i Basic
For Outback Limited 2005, 2008
For Outback R L.L. Bean Edition 2005-2008
For Outback R VDC Limited 2006
For Outback XT Limited 2005,2007-2009
For Outback 2005 (submodel: i, VDC Limited)
For Outback 2005-2006 (submodel: R, XT)
For Outback 2006-2009 (submodel: 2.5i, 2.5i Limited)
For Outback 2008 (submodel: 2.5 XT, 2.5i L.L. Bean Edition, 2.5i Limited L.L. Bean Edition, 3.0 R, Base, Premier, Touring)
For Outback 2009 (submodel: 2.5i Special Edition, 3.0 R Limited, 3.0 R Premier)

OE/Part number

262310, 36R1148

Specification

Input Shaft Diameter(MM):17

Pressure Port Thread Size:M13.5*1.5

Return Port Thread Size:M15*1.5

Number of Mounting Holes:2

Rack Length(MM):1210

Package included

1 x Power Steering Rack & Pinion Assembly

Note

In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.
1.100% High quality brand new, strict QC & fitment tested
2. Turn the steering wheel to the straight ahead position.
3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.
4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.
5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.
6. Install the steering gear on the mounting base and tighten the fixing bolts.
7. Universal joint or coupling between mounting column and steering gear.
8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.
9. Keep the steering wheel in straight ahead position.
10. Put the pitman arm on the steering gear to align the two marks.
11. Tighten the locknut according to the specified torque and rivet (anti loose pit)