Maxpeedingrods Coilovers 24 Way Damper Shocks compatible for BMW 5 Series AWD XI E60 03-10

Introduction

MaXpeedingrods-B3 is based on MaXpeedingrods-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions.

Application

Compatible for BMW 5 series (E60) 2004-2010 Sedan AWD
Model: 525xi,528i xDrive,528xi,530xi,535i xDrive,535xi
Note:
1. Will not fit models with air suspension.
2. The front damper knuckle insert diameter is 56.8mm.
Please verify the model and dimensions before purchasing to ensure compatibility.

Specification

Front top mount: pillow ball
Rear top mount: standard rubber
Damping adjustable: Available, 24 levels of rebound damping force
Height adjustable: Yes, lowering 1-3 inches depending on the vehicle models
Spring Rate Front: 10kg/mm(560lbs/in)
Spring Rate Rear: 7kg/mm(392lbs/in)
Front spring inner diameter: 70.5mm
Rear spring inner diameter: 70.5mm
Spring length Front: 200mm
Spring length Rear: 200mm
Spring Preload advised: 7-10 mm
Color: Golden body with black spring

Package included

Package included：
1 x Set of Coilover Spring Kit (2 Front + 2 Rear)
1 x Pair of wrenches for height adjustment

Dimension

Package size : 71*51*21cm
Weight: 25990g

Feature

1. Lowered height adjustment from 1" - 3" (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance
2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. ( for some models)
5. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
7. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

Note

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.

Notice

1. Installation Requirement: Use spacers to prevent movement of rubber boots when installing eye-type coilovers.
2. Regular Inspection: Rubber boots typically last 1-3 years, depending on factors such as vehicle weight, road conditions, climate, and driving habits. Inspect them every six months or during routine maintenance, and replace them immediately if any damage or signs of aging are observed.
3. Warranty Coverage Notice: Normal wear and tear on rubber components is not covered by warranty.