Coilovers 24 Way Damper Suspension compatible for BMW E39 5-Series 1997-2003 525i 530i 540i

Introduction

Maxpeedingrods-B3 is based on Maxpeedingrods-B2 coil-overs, which are also height adjustable. They are also made for street use, but the 24-level rebound damping control allows you the ability to perfectly dial in your coil-over setup. You will experience better ride quality in all road conditions.

Application

Compatible for BMW 5 (E39) (1995-2003)RWD notchback
model:525 i，530 i，540 i， 520 d，520 i，523 i，525 td，525 tds，528 i 525 d，530 d，535 i
Note: Not for Wagon or M5 Models
Will not fit Self Leveling/Air suspension model

Specification

Front top mount: Pillow ball with camber plate
Rear top mount: Standard rubber
Damping adjustable: Available, 24 levels of rebound damping force
Camber adjustable: Available
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Spring rate Front: 12 kg/mm (672 lbs/in)
Spring rate Rear: 9 kg/mm (504 lbs/in)
Front spring inner diameter: 70.5 mm
Rear spring inner diameter: 70.5 mm
Spring length Front: 190 mm
Spring length Rear: 190 mm
Spring Preload advised: 7-10 mm
Color: Red body with black spring

Package included

Package included：
2x Front coil-overs
2x Rear coil-overs
1x Allen wrench
2x C spanners

Dimension

Package size : 71*50*20 cm
Weight: 26900 g

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance
2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. ( for some models)
5. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
7. High tensile spring--- 600,000 times continuously test to assure its high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

Notice

Notice:
1. Installation Requirement: Use spacers to prevent movement of rubber boots when installing eye-type coilovers.
2. Regular Inspection: Rubber boots typically last 1-3 years, depending on factors such as vehicle weight, road conditions, climate, and driving habits. Inspect them every six months or during routine maintenance, and replace them immediately if any damage or signs of aging are observed.
3. Warranty Coverage Notice: Normal wear and tear on rubber components is not covered by warranty.